If you are building or renovating a Hampton style home and you are looking for a garage door suitable for your home design please contact Danmar Garage Doors on 1300 302 988 to find out how we can assist you in achieving what you are looking for.

A Danmar Garage Door is guaranteed to complement most architectural styles, thus creating an exceptional overall street appeal.

Danmar’s custom garage doors are excellent value for money and allow you the freedom to design a garage door that truly reflects the style of your home at a price that suits your budget.

 

The garage door in the picture above has been manufactured by Danmar Garage Doors and it is made of Western Red Cedar boards painted in white, with grey tint acrylic windows fixed to an aluminium frame. We call this style Danmar ‘Carriage Panel’. The picture below is another custom made sectional garage door by Danmar Garage Doors where clients were looking for something a bit different to complement their ‘Hampton Style’ home.

For more information about our custom garage doors please contact us on 1300 302 988 or at sales@danmardoorswa.com.au

 

In our previous blog we have written the standard clearances required to install a sectional garage door. Due the number of inquiries about fixings required for suspended ceilings we are now back with a short blog advising where these fixings are usually required. Please see drawing below:

If using timber for the fixings we would recommend them to be approximately 300mm x 300mm x 20mm thick. It is very important for these fixings to be fitted right above the ceiling and to be fixed to a solid structure; eg. the concrete slab above. The main purpose of these fixings is to provide a sound structure for your garage door operation as well as to prevent the ceiling from cracking.

For more information about our products please contact Danmar Garage Doors on 1300 302 988 or at sales@danmardoorswa.com.au

 

The dimensions below are standard requirements for standard installation of sectional garage doors. In case some of the requirements below cannot be met please contact Danmar Garage Doors or one of its resellers for free advice in how to achieve the best possible outcome.

 

A. Opening Height

• Door height = Opening height + 10mm

B. Opening width

• Door width = Opening width + 60mm or Opening width + 80mm (Thermopanels only)

C. Side Room left (size of return without obstruction)

• Minimum 125mm required to eliminate need for side jamb (Thermopanels require minimum of 135mm due to greater overlap of garage door width)

D. Side Room right (size of return without obstruction)

• Minimum 125mm required to eliminate need for side jamb (Thermopanels require minimum of 135mm due to greater overlap of garage door width)

E. Head Room (Lintel to ceiling/cornice without obstruction)

• Standard headroom application used if greater than 350mm
• Low Headroom application (twin tracks) is required between 250mm and 350mm
• Pelmet or Headpanel may be required if less than 250mm (residential) or less than 300mm if commercial motor is being used

F. Motor Position

• Door height + 1000mm without obstruction to ensure maximum door opening (unless side mount motor is being used).

 

 

For more information about our products please contact Danmar Garage Doors on 1300 302 988 or at sales@danmardoorswa.com.au